Product ID:KRAFT FACED INSULATION
MSDS Date:09/30/1985
FSC:6850
NIIN:00F013251
MSDS Number: BJLRP

Emergency Phone: 419-248-5330/419-248-8234

Info Phone: 419-248-8234/706-594-6977

Cage: FO654

Telephone: 419-248-8234

Cage: 45255

GLASS OXIDE, FIBER GLASS WOOL, LEAD BOROSILICATE GLASS

CAS: 65997-17-3

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MECHANICAL IRRITATION OF
MOUTH, NOSE, & THROAT, POSSIBLE IRRITATION OF UPPER RESPIRATORY
TRACT. EYES/SKIN: MECHANICAL IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, ITCHING

First Aid:INHALATION: ADMINISTER OXYGEN. SKIN: WASH W/SOAP & RUNNING
WATER. EYES: FLUSH W/RUNNING WATER FOR 15 MINS. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Extinguishing Media:WATER, FOAM, DRY CHEMICAL
Fire Fighting Procedures:THE FACING ON KRAFT PAPER/FOIL FACED PRODUCTS
WILL BURN & SHOULDN'T BE LEFT EXPOSED. SPECIAL CARE SHOULD BE TAKEN
WHEN WORKING CLOSE TO THE FACING W/OPEN FLAME.
Unusual Fire/Explosion Hazard:VINYL FACED PRODUCTS IN FIRE CONDITIONS
MAY GIVE OFF HYDROGEN CHLORIDE, A HIGHLY IRRITATING & TOXIC GAS.
EVACUATE THE BUILDING IMMEDIATELY.

Handling and Storage Precautions:INSULATION SHOULD BE STORED IN DRY
PLACE. FACED MATERIAL SHOULD BE STORED WELL AWAY FROM SOURCES OF
IGNITION.

Respiratory Protection:IF TLV IS EXCEEDED/IRRITATION OCCURS, USE A
RESPIRATOR SUCH AS 3M MODEL 8710 FOR PROTECTION AGAINST NUISANCE
DUST.
Ventilation:AMBIENT
Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:LONG SLEEVED, LOOSE FITTING CLOTHING, LONG
PANTS, CAP WHEN HANDLING MATERIAL OVERHEAD
Work Hygienic Practices:SHOWER AT END OF WORK DAY. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE. WIPE OUT WASHER AT END OF
CYCLE.
Supplemental Safety and Health
APPEARANCE & ODOR CONT'D: PINK, YELLOW, TAN/BLACK INSULATION, MAY HAVE
FAINT RESIN ODOR. SOME PRODUCTS HAVE A VINYL, KRAFT PAPER,
FOIL/POLYPROPYLENE FACING.

Solubility in Water:INSOLUBLE
Appearance and Odor:(SEE SUPPLEMENTAL DATA)

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:FIRE/OPEN FLAME IN CONTACT W/VINYL FACE
PRODUCTS, HIGH TEMPS AT/ABOVE 525F & OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:CO, CO2, HYDROGEN CHLORIDE

Waste Disposal Methods:THE PRIMARY METHOD OF DISPOSAL IS IN A
MUNICIPAL/INDUSTRIAL LANDFILL. DISPOSE OF IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.